kali设置代理 kali设置中文

2023-09-23 10:43:30

『壹』在Kali Linux中，我的无线网卡被识别为eth0，而不是wlan0，请问如何将其名称改回wlan0

1、直接进入Kali Linux的启动菜单，选择深度终端运行。

『贰』求助：如何将kali攻击机添加到目标的内网里

使用桥接上网的话需要配置linux系统的IP，具体步骤如下:1,在命令行模式下或者桌面上进入终端模式，找到/etc/sysconfig/network-script/ifcfg-eth0文件；2，使用vi打开文件viifcfg-eth0,注意，有的linux系统这个文件可能不带ifcfg前缀。3，需要改动的:BOOTPROTO=static#默认是dhcp,自动获取,自动获取需要将网络模式改桥接模式需要增加的:IPADDR=192.168.1.10#地址是自己设置的NETMASK=255.255.255.0修改好之后保存退出。这样linux可以上网了。4，如果想要使电脑和linux在同一局域网下，方面2台机器之间互连的话。还需要配置电脑的ip，打开网络和共享中心->打开适配器设置->可以看到有1个vmware的网络(有的可能是2个)，右键第一个属性，打开TCP/IPv4的属性设置，将ip地址设置成192.168.1.20。

『叁』 Kali手动配IP

两种方法：

一卖并、图形化界面配IP地址

（1）打开kali的设置

（2）找出“网络”点开右上角的齿轮

（3）点开IPv4进行手动配置

注：配置过程中，虚拟机要和物理机在同一网段。比如说我的物理机IP是192.168.1.4，那我的虚拟机IP也要是192.168.1.x

二、命令行配IP地址

（1）vi /etc/network/interfaces进入手工配置ip

补全里面内容

# This file describes the network interfaces available on your system

# and how to activate them. For more information， see interfaces（5）。

# The loopback network interface

auto lo

iface lo inet loopback

auto eth0//指定eth0网卡

iface eth0 inet static //中租迹静态地址（动态获取用dhcp）

address 192.168.0.133 //你的虚拟机IP地址型顷，你的是啥你就写啥

netmask 255.255.255.0 //子网掩码

gateway 192.168.0.1 //默认网关

DNS配置（命令行配置DNS）：

vi/etc/network/interfaces进入添加

或者vi /etc/resolv.conf进入添加

『肆』 Kali配置网卡

配置kali的网卡禅氏：

参考： https://www.cnblogs.com/gychomie/p/11013465.html

注意两点：

以管理员身派者份运行‘虚拟机’

注意你真实机用的网卡名字：虚拟机网卡就是和它桥接的。

结果：Ipv4 ipv6地址都有。虚拟机不能PING通真实机，因为开了防火墙

备注：

vi /etc/network/interfaces

auto eth0

iface eth0 inet dhcp

重启服务命令：service networking restart

在虚拟机里面配置‘NAT’之后，启动kali，进入系统，右击‘网卡’，点击‘edits connections...’，双击‘ETHERNET’贺羡散下面的网卡，进入配置项。勾选‘Ipv4’里面的‘Require ipv4 addressing XXXX’，保存；

『一』 In Kali Linux, my wireless network card is recognized as eth0 instead of wlan0. How can I change its name back to wlan0

1. Directly enter the startup of Kali Linux Menu, select Deepin Terminal to run.

『二』 Help: How to add the kali attack machine to the target’s intranet

If you use a bridge to access the Internet, you need to configure the IP of the Linux system, specifically The steps are as follows: 1. Enter the terminal mode in the command line mode or on the desktop and find the /etc/sysconfig/network-script/ifcfg-eth0 file; 2. Use vi to open the file viifcfg-eth0. Note that some Linux systems have this file. May not be prefixed with ifcfg. 3. What needs to be changed: BOOTPROTO=static#The default is dhcp, which is automatically obtained. The network mode needs to be changed to the bridge mode automatically. What needs to be added: IPADDR=192.168.1.10#The address is set by yourself. NETMASK=255.255.255.0 After modification, save it. quit. In this way, Linux can access the Internet. 4. If you want your computer and Linux to be on the same LAN, you can interconnect the two machines. You also need to configure the computer's IP, open Network and Sharing Center -> Open Adapter Settings -> You can see that there is 1 vmware network (some may be 2), right-click the first property, and open the TCP/IPv4 property settings , set the ip address to 192.168.1.20.

『三』 Kali manual IP configuration

Two methods:

One-stop, graphical interface configuration IP address

(1) Open the settings of kali

(2) Find "Network" and click on the gear in the upper right corner

(3) Click on IPv4 for manual configuration

Note: During the configuration process, the virtual machine must be on the same network segment as the physical machine. For example, if my physical machine IP is 192.168.1.4, then my virtual machine IP must also be 192.168.1.x

2. Configure IP address on the command line

(1 ) vi /etc/network/interfaces enter manual configurationSet ip

Complete the content

# This file describes the network interfaces available on your system

# and how to activate them. For more information, see interfaces(5).

# The loopback network interface

auto lo

iface lo inet loopback

auto eth0//Specify eth0 network card

iface eth0 inet static //Static address of Zhongzhi (dynamically obtained using dhcp)

address 192.168.0.133 //Your virtual machine IP address type, your Just write whatever it is

netmask 255.255.255.0 //Subnet mask

gateway 192.168.0.1 //Default gateway

DNS configuration (Command line configuration DNS):

vi/etc/network/interfaces enter to add

or vi /etc/resolv.conf enter to add

『 4』 Kali configuration network card

Configuring Kali’s network card Zen:

Reference: https://www.cnblogs.com/gychomie/p/11013465.html

Pay attention to two points:

Run the 'virtual machine' as an administrator

Pay attention to the name of the network card used by your real machine: the virtual machine network card is and itbridged.

Result: Both IPv4 and IPv6 addresses are available. The virtual machine cannot PING the real machine because the firewall is turned on

Notes:

vi /etc/network/interfaces

auto eth0

iface eth0 inet dhcp

Restart the service command: service networking restart

After configuring 'NAT' in the virtual machine, start kali, enter the system, and right-click 'Network card', click 'edits connections...', double-click the network card under 'ETHERNET' He Xiansan to enter the configuration items. Check 'Require ipv4 addressing XXXX' in 'Ipv4' and save;